WOODCHOICES.COM

1” – 2” Replacement Blades for Tenon Cutters

CNC machined from solid 6061 aircraft aluminum for maximum precision
and minimumweight, these tenon cutters feature dual blades made of hardened
steel and a selfcenteringdesign to produce perfectly shaped radius shoulder
tenons. Dual blades notonly cut twice as fast, but also generate less
heat for long-lasting service. Available in1

5” Clamp-It Bar Clamp

Our exclusive Clamp-It Bar Clamp is now available in three sizes for
use with the Clamp-It Assembly Square (#29190) or Adjustable Clamp-It
Assembly Tool (#33586).Available in 5

Powermatic 29 Shaper, 5HP 3PH 230/460V

Powermatic 29 Shaper, 5HP 3PH 230/460VExtra thick cast iron table with
T-slot for heavy duty supportSpindle tilts 45 degrees forward and 5 degrees
back for bevel shapingThree standard table inserts, smaller insert has
guide shoulder for copy workMiter gauge has clamp assembly and work stop
for shaping the ends of stockEntire hold down assembly with cutterhead
shield flips out of the way for spindle changesSturdy fence assembly has
adjustment dials for fine-tuningWork-piece hold-downs and cutterhead shield3
table inserts – 2-1/2″ and 5-1/2″ standard and 5-7/8″ x 4-3/16″ oval3
Spindles – 3/4

15” Tandem Blumotion Drawer Slides

Blumotion is a unique system for smooth and silent drawer closing. Your
drawers and pullouts will have perfect movement with quiet, effortless
operation. Each set includes two Blumotion housing units already pre-installed
on the two Blum Tandem slides with smooth ball-bearing movement, available
in 15

21” Tandem Blumotion Drawer Slides

Blumotion is a unique system for smooth and silent drawer closing. Your
drawers and pullouts will have perfect movement with quiet, effortless
operation. Each set includes two Blumotion housing units already pre-installed
on the two Blum Tandem slides with smooth ball-bearing movement, available
in 15

3-Pc. Mini Raised Panel Router Bit Set

Create miniature frame and panel doors as small as 2-3/4″ square! This
stile and rail router bit set works with stock as thin as 7/16

5/16 QuickSet Toggle Clamp Adaptor

Finally, a simple replacement for the tedious double-nut fitting on most
hold-down toggle clamps! Change depth-of-pressure in seconds with the
adjustable rubber foot, and for movement in-and-out along the arm just
loosen a single set screw and adjust away. A comfortable locking knob
caps it all off.Available in two sizes, 5/16″ and 1/4

18” Tandem Blumotion Drawer Slides

Blumotion is a unique system for smooth and silent drawer closing. Your
drawers and pullouts will have perfect movement with quiet, effortless
operation. Each set includes two Blumotion housing units already pre-installed
on the two Blum Tandem slides with smooth ball-bearing movement, available
in 15

3-Piece Engineer Square Set

This handy set is great for setting up and checking machines and projects
for extreme accuracy to 0.00063″.Includes 2

1/4 QuickSet Toggle Clamp Adaptor

Finally, a simple replacement for the tedious double-nut fitting on most
hold-down toggle clamps! Change depth-of-pressure in seconds with the
adjustable rubber foot, and for movement in-and-out along the arm just
loosen a single set screw and adjust away. A comfortable locking knob
caps it all off.Available in two sizes, 5/16″ and 1/4

JWBS-16B, 16” Bandsaw

Triangular design provides superior column rigidity. 10″ resaw capacity
for cutting large pieces of wood, slicing veneers, cutting book matched
panels. 17″ x 17″ cast iron table supports your work material. Adjustable
rear support for wider footprint and more stability. Precision computer
balanced wheels eliminate vibration for accurate blade tracking. Micro-adjustable
lower blade guide reduces friction for longer blade life. European style
adjustable carbide blade guides. 8-spoke band wheels computer balanced
to spin true without vibration. Rigid, heavy-duty guide post with rack
and pinion adjustment for extra blade support. All cast iron handwheels
make smooth, easy blade adjustments with less effort. 3/8

4-1/2”W x 42”L Morris Column, Soft Maple

The simple, solid beauty of the Craftsman style with subtle, finely-balanced
touches atthe base and crown. These are perfect for island corners – simply
cut a V-notch in onecorner of the leg. Or you can halve them or quarter
them to dress up the faces of basecabinets. The columns come in two heights:
36″ and 42

4-1/2”W x 36”L Morris Column, Red Oak

The simple, solid beauty of the Craftsman style with subtle, finely-balanced
touches atthe base and crown. These are perfect for island corners – simply
cut a V-notch in onecorner of the leg. Or you can halve them or quarter
them to dress up the faces of basecabinets. The columns come in two heights:
36″ and 42

3/8” Plug Cutter

Unique spring-loaded self-centering tip guides cutter and prevents walking
to cut a smooth, tapered plug every time!Set Includes 5/16

Corrugated Fastener Tool for Face Frame Construction

Make quick work of face frame construction, butt joints, cabinets, door
and window construction and more. Corrugated fasteners work in hard and
soft woods to draw joints together and offer twice the strength of regular
fasteners. Fastener Tool drives 1/2″ fasteners in 1/4

EZ-Mark Line Cords

A quick, easy way of marking or identifying the location of shelves and
internal construction components.Ideal for fastening back and sides onto
cabinets without marking the wood.Includes three elastic cords: 10

Radius Shoulder Tenon Cutter, 1” Diameter Tenon

CNC machined from solid 6061 aircraft aluminum for maximum precision
and minimumweight, these tenon cutters feature dual blades made of hardened
steel and a selfcenteringdesign to produce perfectly shaped radius shoulder
tenons. Dual blades notonly cut twice as fast, but also generate less
heat for long-lasting service. Available in1

1/2” Corrugated Fasteners (approx. 1000)

Make quick work of face frame construction, butt joints, cabinets, door
and window construction and more. Corrugated fasteners work in hard and
soft woods to draw joints together and offer twice the strength of regular
fasteners. Fastener Tool drives 1/2″ fasteners in 1/4

5/16” Plug Cutter

Unique spring-loaded self-centering tip guides cutter and prevents walking
to cut a smooth, tapered plug every time!Set Includes 5/16

4-1/2”W x 42”L Morris Column, Red Oak

The simple, solid beauty of the Craftsman style with subtle, finely-balanced
touches atthe base and crown. These are perfect for island corners – simply
cut a V-notch in onecorner of the leg. Or you can halve them or quarter
them to dress up the faces of basecabinets. The columns come in two heights:
36″ and 42

4-1/2”W x 36”L Morris Column, Cherry

The simple, solid beauty of the Craftsman style with subtle, finely-balanced
touches atthe base and crown. These are perfect for island corners – simply
cut a V-notch in onecorner of the leg. Or you can halve them or quarter
them to dress up the faces of basecabinets. The columns come in two heights:
36″ and 42

3-1/2”W x 42”L Morris Column, Soft Maple

The simple, solid beauty of the Craftsman style with subtle, finely-balanced
touches atthe base and crown. These are perfect for island corners – simply
cut a V-notch in onecorner of the leg. Or you can halve them or quarter
them to dress up the faces of basecabinets. The columns come in two heights:
36″ and 42

4-1/2”W x 42”L Morris Column, Cherry

The simple, solid beauty of the Craftsman style with subtle, finely-balanced
touches atthe base and crown. These are perfect for island corners – simply
cut a V-notch in onecorner of the leg. Or you can halve them or quarter
them to dress up the faces of basecabinets. The columns come in two heights:
36″ and 42

8” Clamp-It Bar Clamp

Our exclusive Clamp-It Bar Clamp is now available in three sizes for
use with the Clamp-It Assembly Square (#29190) or Adjustable Clamp-It
Assembly Tool (#33586).Available in 5

Radius Shoulder Tenon Cutter, 1-1/2” Diameter Tenon

CNC machined from solid 6061 aircraft aluminum for maximum precision
and minimumweight, these tenon cutters feature dual blades made of hardened
steel and a selfcenteringdesign to produce perfectly shaped radius shoulder
tenons. Dual blades notonly cut twice as fast, but also generate less
heat for long-lasting service. Available in1

1/4” Corrugated Fasteners (approx. 1000)

Make quick work of face frame construction, butt joints, cabinets, door
and window construction and more. Corrugated fasteners work in hard and
soft woods to draw joints together and offer twice the strength of regular
fasteners. Fastener Tool drives 1/2″ fasteners in 1/4

3-1/2”W x 42”L Morris Column, Red Oak

The simple, solid beauty of the Craftsman style with subtle, finely-balanced
touches atthe base and crown. These are perfect for island corners – simply
cut a V-notch in onecorner of the leg. Or you can halve them or quarter
them to dress up the faces of basecabinets. The columns come in two heights:
36″ and 42

12” Clamp-It Bar Clamp

Our exclusive Clamp-It Bar Clamp is now available in three sizes for
use with the Clamp-It Assembly Square (#29190) or Adjustable Clamp-It
Assembly Tool (#33586).Available in 5

3-1/2”W x 36”L Morris Column, Cherry

The simple, solid beauty of the Craftsman style with subtle, finely-balanced
touches atthe base and crown. These are perfect for island corners – simply
cut a V-notch in onecorner of the leg. Or you can halve them or quarter
them to dress up the faces of basecabinets. The columns come in two heights:
36″ and 42

Leigh Super 12” Dovetail Jig

Extraordinary joint making capability at an exceptional price point!
Cut variably spaced Through & Half-blind dovetails easily and accurately.
Infinitely adjustable one-piece fingers are easily positioned for any
joint pattern, and you are always guaranteed a half pin at each edge of
the joint. Rout half-blind pin boards and tail boards at the same time.
The finger assembly can also produce two sizes of box joints, 5/16″ and
5/8″. Adjustments for fit can be made in increments of .002″. You can
even install the included crosscut fence and the dovetail finger assembly
becomes a sliding dovetail template. Available in three widths: 12

3-1/2”W x 36”L Morris Column, Red Oak

The simple, solid beauty of the Craftsman style with subtle, finely-balanced
touches atthe base and crown. These are perfect for island corners – simply
cut a V-notch in onecorner of the leg. Or you can halve them or quarter
them to dress up the faces of basecabinets. The columns come in two heights:
36″ and 42

3-1/2”W x 36”L Morris Column, Soft Maple

The simple, solid beauty of the Craftsman style with subtle, finely-balanced
touches atthe base and crown. These are perfect for island corners – simply
cut a V-notch in onecorner of the leg. Or you can halve them or quarter
them to dress up the faces of basecabinets. The columns come in two heights:
36″ and 42

3/8” Corrugated Fasteners (approx. 1000)

Make quick work of face frame construction, butt joints, cabinets, door
and window construction and more. Corrugated fasteners work in hard and
soft woods to draw joints together and offer twice the strength of regular
fasteners. Fastener Tool drives 1/2″ fasteners in 1/4

Leigh Solid Carbide Router Bit Set for Isoloc Templates

These 3-pc. sets contain all three Leigh isoloc bits for perfect decorative
joints, both standard and inlaid. Both include 5/16

3-1/2”W x 42”L Morris Column, Cherry

The simple, solid beauty of the Craftsman style with subtle, finely-balanced
touches atthe base and crown. These are perfect for island corners – simply
cut a V-notch in onecorner of the leg. Or you can halve them or quarter
them to dress up the faces of basecabinets. The columns come in two heights:
36″ and 42

4-1/2”W x 36”L Morris Column, Soft Maple

The simple, solid beauty of the Craftsman style with subtle, finely-balanced
touches atthe base and crown. These are perfect for island corners – simply
cut a V-notch in onecorner of the leg. Or you can halve them or quarter
them to dress up the faces of basecabinets. The columns come in two heights:
36″ and 42

Large Ellipse Jig Base

This larger base works with the Ellipse/Circle Router Jig for more design
flexibility and ellipses with narrower proportions. The larger size increases
the maximum difference between the major and minor axes from 8″ to 14″.
In other words, the maximum length of the major axis remains 52

7/16” Plug Cutter

Unique spring-loaded self-centering tip guides cutter and prevents walking
to cut a smooth, tapered plug every time!Set Includes 5/16

Radius Shoulder Tenon Cutter, 2” Diameter Tenon

CNC machined from solid 6061 aircraft aluminum for maximum precision
and minimumweight, these tenon cutters feature dual blades made of hardened
steel and a selfcenteringdesign to produce perfectly shaped radius shoulder
tenons. Dual blades notonly cut twice as fast, but also generate less
heat for long-lasting service. Available in1

3 Pc Self-Centering Plug Cutter (Set Includes 5/16”, 3/8” and 1/2” cutters)

Unique spring-loaded self-centering tip guides cutter and prevents walking
to cut a smooth, tapered plug every time!Set Includes 5/16

Stanley 77-115 Stud Sensor 150

Find studs quickly and accurately with this 77-115 Stud Sensor from Stanley!
With fast-reading ASIC technology searching at depths of 1-1/2

Leigh Super 12” Dovetail Jig with AC12 Leigh Jig Accessory Kit

Extraordinary joint making capability at an exceptional price point!
Cut variably spaced Through & Half-blind dovetails easily and accurately.
Infinitely adjustable one-piece fingers are easily positioned for any
joint pattern, and you are always guaranteed a half pin at each edge of
the joint. Rout half-blind pin boards and tail boards at the same time.
The finger assembly can also produce two sizes of box joints, 5/16″ and
5/8″. Adjustments for fit can be made in increments of .002″. You can
even install the included crosscut fence and the dovetail finger assembly
becomes a sliding dovetail template. Available in three widths: 12

Adjustable Door Mount Spice Rack

A collection of Wood Classic spice racks for your wall cabinet doors.Add
spice, flexibility and convenience with Rev-A-Shelf’s Adjustable Door
Mount Spice Rack. This beautiful birch/maple hardwood rack is available
for Wall 15

Adjustable Door Mount Spice Rack

A collection of Wood Classic spice racks for your wall cabinet doors.Add
spice, flexibility and convenience with Rev-A-Shelf’s Adjustable Door
Mount Spice Rack. This beautiful birch/maple hardwood rack is available
for Wall 15

Adjustable Door Mount Spice Rack

A collection of Wood Classic spice racks for your wall cabinet doors.Add
spice, flexibility and convenience with Rev-A-Shelf’s Adjustable Door
Mount Spice Rack. This beautiful birch/maple hardwood rack is available
for Wall 15

Knife Holder and Cutting Board Drawer System, Wood – Maple

These organizers come complete with slides and drawer boxes to replace
your existing drawer. All you have to do is add your drawer front to these
accessories to make your custom drawer organizer.This state-of-the-art
combination knife holder/cutting board system glides on full-extension
ball bearing slides and is designed for Base 18

Knife Holder and Cutting Board Drawer System, Wood – Maple

These organizers come complete with slides and drawer boxes to replace
your existing drawer. All you have to do is add your drawer front to these
accessories to make your custom drawer organizer.This state-of-the-art
combination knife holder/cutting board system glides on full-extension
ball bearing slides and is designed for Base 18

Knife Holder and Cutting Board Drawer System, Wood – Maple

These organizers come complete with slides and drawer boxes to replace
your existing drawer. All you have to do is add your drawer front to these
accessories to make your custom drawer organizer.This state-of-the-art
combination knife holder/cutting board system glides on full-extension
ball bearing slides and is designed for Base 18

Door Mount Spice Rack, Wood – Maple

A collection of Wood Classic spice racks for your wall cabinet doors.Maintain
shelf space and keep spices reachable in this Wood Classic Door Mount
Spice Rack. Made of attractive birch/maple hardwood, this storage saver
is available for Wall 15

Door Mount Spice Rack, Wood – Maple

A collection of Wood Classic spice racks for your wall cabinet doors.Maintain
shelf space and keep spices reachable in this Wood Classic Door Mount
Spice Rack. Made of attractive birch/maple hardwood, this storage saver
is available for Wall 15

Door Mount Spice Rack, Wood – Maple

A collection of Wood Classic spice racks for your wall cabinet doors.Maintain
shelf space and keep spices reachable in this Wood Classic Door Mount
Spice Rack. Made of attractive birch/maple hardwood, this storage saver
is available for Wall 15

Door-Mounted Cabinet Spice Rack 9-5/8” W x 21-1/2” H x 3-1/8” D

Get the ultimate in kitchen convenience and storage with a door-mounted
cabinet spice rack. Designed for 15

Door-Mounted Cabinet Spice Rack 12-5/8” W x 21-1/2” H x 3-1/8” D

Get the ultimate in kitchen convenience and storage with a door-mounted
cabinet spice rack. Designed for 15

Door-Mounted Cabinet Spice Rack 15-5/8” W x 21-1/2” H x 3-1/8” D

Get the ultimate in kitchen convenience and storage with a door-mounted
cabinet spice rack. Designed for 15

Foam Brush Set

Tackle many of your finishing jobs with this great value on a 24-piece
set! Includes six 1

36-Piece Chip Brush Set

This 36-piece Chip Brush Set is great for applying glues, contact cements
and touch-up finishing at a great low price! Set contains 12 each of 1

Door Mount Spice Rack, Natural

A collection of Wood Classic spice racks for your wall cabinet doors.Maintain
shelf space and keep spices reachable in this Wood Classic Door Mount
Spice Rack. Made of attractive birch/maple hardwood, this storage saver
is available for Wall 15

Door Mount Spice Rack, Natural

A collection of Wood Classic spice racks for your wall cabinet doors.Maintain
shelf space and keep spices reachable in this Wood Classic Door Mount
Spice Rack. Made of attractive birch/maple hardwood, this storage saver
is available for Wall 15

Door Mount Spice Rack, Natural

A collection of Wood Classic spice racks for your wall cabinet doors.Maintain
shelf space and keep spices reachable in this Wood Classic Door Mount
Spice Rack. Made of attractive birch/maple hardwood, this storage saver
is available for Wall 15

Freud Premier Thin Kerf Fusion Saw Blade

The ultimate combination of fused tooth grind geometry, blade body rigidity
and precise tensioning give this blade high performance for rips from
3/8″ to 1-1/2″ and crosscuts from 3/4″ to 3-1/2″. A special carbide blend,
superior carbide brazing and non-stick Perma-SHIELD coating minimize vibration
and greatly lengthen blade life. 3/32″ kerf.Kerf 0.098′ Plate 0.071″ Arbor
5/8